Description
– Piston gappin removal tool for pushed or clogged gazun/piston pins.
– Can be used with any type of piston if the inner gazion pin diameter is 8mm to 15mm.
– A must have for any workshop.
– Screw the round brace into the end of the main tool body.
– Place the main tool body (with the brace installed) on one side of the piston above the pin hole in the direction of moving the pin
– Insert the pulling pin into the pin hole on the opposite side of the piston to pass the center of the gazion pin.
– Use the hex wrench to screw the tension pin into the inside of the main tool body.
– Turn the main bolt of the tool body to keep it away from the piston, and then pull the gappin
– Chrome Vanadium Steel
– Length: 11cm / 4.33″
– Bolt Length: 78mm / 3.07″
– For best results, lubricate tool screws before use.