- Page 76 of 151 - Madukani

Customer matched zone "Kenya"

“50m 165ft Cloth Tape Measure” has been added to your cart. View cart

Showing 1501–1520 products from 3007 products

Sort by

Behringer C2 2 Matched Studio Condenser Microphones

– 2 matched condenser microphones for stereo studio recording and live applications
– Ideal as main and support microphones for studio and live applications
– Cardioid pickup pattern for effective feedback elimination
– Low-mass diaphragm for ultra-wide frequency response and ultimate sound reproduction
– Switchable low-frequency roll-off and input attenuation
– Ultra low-noise transformerless FET input eliminates low-frequency distortion
– Ultra-rugged construction with metal die-cast body
– Gold-plated 3-pin XLR connector for highest signal integrity
– Operating Principle: Pressure Gradient
– Capsule: Condenser
– Diaphragm: 0.63″ / 16 mm
– Pad: -10 dB
– High-Pass Filter: 120 Hz, 6 dB/Octave
– Frequency Range: 20 Hz to 20 kHz
– Maximum SPL: 140 dB SPL
– Impedance: 75 Ohms
– Load Impedance: 1000 Ohms
– Sensitivity: -41 dBV/Pa at 1 kHz
– Signal-to-Noise Ratio: 75 dB
– Equivalent Noise Level: 19 dB A-Weighted
– THD: 1%
– Operating Current Consumption: 3 mA
– Weight: 0.2 lb / 90.72 g

PACKAGE INCLUDES:

– 2 x Stereo Matched C-2 Microphones
– 2 x Custom Microphone Stand Adapters
– 2 x Windscreeens
– Stereo-bar
– Carrying Case

KSh18,500.00
Sold By: Madukani
KSh18,500.00 Add to cart
Behringer C3 Dual-Diaphragm Studio Condenser Microphone

– Professional large dual-diaphragm condenser microphone for studio recording and live applications
– Ideal as main and support microphone for studio and live applications
– Selectable cardioid, omnidirectional or figure eight pickup pattern
– Pressure-gradient transducer with shock-mounted dual-diaphragm capsule
– Perfect for acoustic instruments, overhead, piano, etc.
– Exceptionally flat frequency response and ultra-high sound resolution
– Ultra low-noise transformerless FET input eliminates low-frequency distortion
– Ultra-rugged construction with metal die-cast body
– Gold-plated 3-pin XLR connector for highest signal integrity
– Swivel stand mount and transport case included

– Polar Pattern: Multi-pattern
– Frequency range: 40Hz – 18kHz
– Maximum SPL in dB: 142
– Sensitivity (mV/Pa @ 1kHz): 10
– Input: XLR 3 Pole
– Dimensions: Width (mm): 54, Depth (mm): 54, Height (mm): 180
– Weight (kg): 0.42
– Capsule size: Medium
– Mono or stereo: Mono
– Power supply: 48V
– Accessories: Holder, case
– Application Area: Vocals/instrument

KSh16,000.00
Sold By: Madukani
KSh16,000.00 Add to cart
Behringer C1 Medium-Diaphragm Studio Condenser Microphone

– Behringer studio condenser microphone C-1 studio condenser microphone professional, large-diaphragm condenser microphone for unsurpassed audio quality
– Ideal as main and support microphone for studio and live applications Cardioid pickup pattern for outstanding sound source separation and feedback rejection
– Pressure-gradient transducer with shock-mounted capsule
– Ultra-low noise, transformerless FET input eliminates low-frequency distortion LED indicates phantom power operation
– Swivel stand mount and transport case included
– Ultra-rugged construction with metal die-cast body
– Gold-plated 3-pin XLR output connector for highest signal integrity
– High-quality components and exceptionally rugged construction ensure long life
– Transducer Type: Condenser, 16 mm
– Polar Pattern: Cardioid
– Connection: Gold-plated balanced XLR connector
– Open Circuit Sensitivity: -33 +/- 2 dBV (0 dBV = 1 V/Pa)
– Frequency Response: 40 Hz – 20 kHz
– Max. SPL (1% THD @ 1 kHz): 136 dB
– Nominal Impedance: 100 ohms
– Load Impedance: >1 Kohms
– Supply Voltage: +36 – 52 V
– Supply Current: 2.5 mA
– Dimensions: Shaft: 54 mm, length: 169 mm
– Weight: Approximately 0.45 kg
– Included: Behringer C-1 Studio Condenser Microphone, Microphone stand adapter, Swivel mount, Carrying Case, User’s Manual”.

KSh10,500.00
Sold By: Madukani
KSh10,500.00 Add to cart
Behringer C1U USB Studio Condenser Microphone

– Professional, large-diaphragm condenser microphone with built-in USB interface, ideal for podcasters and musicians
– Plug this amazing USB-mic straight into your computer and turn your PC or Mac* computer into a recording system without the need for any other hardware
– Directly works with your PC or Mac computer?ultra-low latency ASIO* driver for PC audio optimization available at behringer.com
– Exceptionally flat frequency response and ultra-high sound resolution perfect for voice, acoustic instruments, etc.
– Cardioid pickup pattern for outstanding sound source separation and feedback rejection
– Pressure-gradient transducer with shock-mounted capsule
– Free audio recording, editing and podcasting software plus 150 instrument/effect plug-ins downloadable at behringer.com
– USB connection cable included
– Swivel stand mount included
– Ultra-rugged construction with metal die-cast body

– Polar pattern: Cardioid
– Frequency range: 40 – 20,000 Hz
– Sound pressure level: 136 dB SPL max
– For Mac and PC
– Included: USB cable and stand adapter, Podifier software package, Juice, PodNova, Golden Ear and Audacity

– Designed and engineered in Germany

KSh11,000.00
Sold By: Madukani
KSh11,000.00 Add to cart
100PCS Standard Blade Fuses 5A, 7.5A, 10A, 15A, 20A, 25A, 30A Car Fuses

100PCS Standard Blade Fuses 5A, 7.5A, 10A, 15A, 20A, 25A, 30A Car Fuses

– All sizes you need to cover 5 commonly used standard blade fuses
– Zn Alloy and Plastic;High chemical stability, good mechanical properties, corrosion resistance
– Blade Fuses, commonly used in most auto cars, trucks, SUVS, boats etc.
– Great compatibility of assorted fuses are specifically designed for Car, Truck, SUV, ATV, UTV, Camper, RV, Motorcycles, Fleet, Golf Car, Boat, snowmobiles, and most general DC applications etc., covering such components as radio, light, turn signals, etc.
– Transparent appearance for quick inspection of fuse conditions, they can be easily identified by their color-coded plastic housings and the carved amp rating figures on the top.
– Single fuse dimensions: 19mm x 14mm.
– Contacts length: 7mm
– Package includes minimum 100 x Standard Blade Fuses
14 x 5A fuses
15 x 7.5A fuses
15 x 10A fuses
14 x 15A fuses
14 x 20A fuses
14 x 25A fuses
14 x 30A fuses

KSh1,000.00
Sold By: Madukani
KSh1,000.00 Add to cart
100PCS Mini Blade Fuses 5A, 7.5A, 10A, 15A, 20A, 25A, 30A Car Fuses

– All sizes you need to cover 5 commonly used standard blade fuses
– Zn Alloy and Plastic;High chemical stability, good mechanical properties, corrosion resistance
– Blade Fuses, commonly used in most auto cars, trucks, SUVS, boats etc.
– Great compatibility of assorted fuses are specifically designed for Car, Truck, SUV, ATV, UTV, Camper, RV, Motorcycles, Fleet, Golf Car, Boat, snowmobiles, and most general DC applications etc., covering such components as radio, light, turn signals, etc.
– Transparent appearance for quick inspection of fuse conditions, they can be easily identified by their color-coded plastic housings and the carved amp rating figures on the top.
– Single fuse dimensions: 16mm x 11mm.
– Contacts length: 7mm
– Package includes minimum 100 x Mini Blade Fuses
14 x 5A fuses
15 x 7.5A fuses
15 x 10A fuses
14 x 15A fuses
14 x 20A fuses
14 x 25A fuses
14 x 30A fuses

KSh1,000.00
Sold By: Madukani
KSh1,000.00 Add to cart
100PCS Low Profile Mini Blade Fuses 5A, 7.5A, 10A, 15A, 20A, 25A, 30A Car Fuses

– All sizes you need to cover 5 commonly used standard blade fuses
– Zn Alloy and Plastic;High chemical stability, good mechanical properties, corrosion resistance
– Blade Fuses, commonly used in most auto cars, trucks, SUVS, boats etc.
– Great compatibility of assorted fuses are specifically designed for Car, Truck, SUV, ATV, UTV, Camper, RV, Motorcycles, Fleet, Golf Car, Boat, snowmobiles, and most general DC applications etc., covering such components as radio, light, turn signals, etc.
– Transparent appearance for quick inspection of fuse conditions, they can be easily identified by their color-coded plastic housings and the carved amp rating figures on the top.
– Single fuse dimensions: 10mm x 10mm.
– Contacts length: 2.5mm
– Package includes minimum 100 x Mini Blade Fuses
14 x 5A fuses
15 x 7.5A fuses
15 x 10A fuses
14 x 15A fuses
14 x 20A fuses
14 x 25A fuses
14 x 30A fuses

KSh1,000.00
Sold By: Madukani
KSh1,000.00 Add to cart
20PCS No. 9623 Plastic Body Clips Car Body Trim Clips

– For 8mm diameter holes
– 20mm deep
– 30mm head cover diameter
– Premium quality push rivets made of heavy-duty plastic & nylon which is strong and durable, robust and vibration resistant.
– Easily to install without any special tools
– Widely used for body, trim, door, door panels, bumpers, fenders, engine splash cover and shield
– Also covers some other applications including telecom equipment, domestic appliances, furniture, electrical equipment etc
– Suitable for Mercedes Benz, BMW, TOYOTA, Honda, Subaru, NISSAN, Mazda, Camry, Lancer, Lexus, jeep.

KSh300.00
Sold By: Madukani
KSh300.00 Add to cart
4.5lb Splitter Wedge Axe Head

– Splitting maul axe designed to split large wood logs
– The optimized blade geometry offers better penetration and blasts tough logs apart
– Ideal for taller users splitting medium- to large-sized logs
– Designed for maximum efficiency to give you one-strike split
– Coating on the blade keeps it sharper for longer and resistant to corrosion
– Balanced head with wings provides for an easy and effective swing
– Pre-sharpened blade that comes razor-sharp
– 4.5lb (2.2kg) head

KSh1,550.00
Sold By: Madukani
KSh1,550.00 Add to cart
36 inch Full Size Splitter Wedge Axe with Fibreglass Handle

– Splitting maul axe designed to split large wood logs

– The optimized blade geometry offers better penetration and blasts tough logs apart

– Ideal for taller users splitting medium- to large-sized logs

– Designed for maximum efficiency to give you one-strike split

– Coating on the blade keeps it sharper for longer and resistant to corrosion

– Balanced head with wings provides for an easy and effective swing

– Pre-sharpened blade that comes razor-sharp

– Shock-absorbing anti-slip fibreglass handle with a cushioned non-slip rubber handle grip

– Brightly colored handle for high visibility among other items

– Through-hole on he handle for easy storage

– 4.5lb (2.2kg) head

KSh2,200.00
Sold By: Madukani
KSh2,200.00 Add to cart
Bamboo Top Foldable Tripod Music Book Stand with Bag

– Adjustable bamboo music stand with bag

– Sturdy Non-Slip Design

– Natural bamboo, elegant, stable and light.

– Natural bamboo has a long service life

– Tripod base with non-slip rubber pads to provide maximum stability.

– The texture of real bamboo is clearly visible for authentic retro feel

– Height and tilt adjustment with 340° swing design and 135cm high

– 40cm x 29cm reading table with a 2.5cm retaining book stop platform enough to hold any type of music scores or books

– 2 spring clamp arms at the top of the front to hold score or book in place

– Wooven polyester bag provided

KSh7,000.00
Sold By: Madukani
KSh7,000.00 Add to cart
Classic 60s 4 String Jazz Bass with Ox Leather Strap

– Classic ’60s sound from one of the most versatile bass guitars ever created
– Multidimensional tone with two vintage-style single coil pickups
– Play with comfort and dexterity on a ‘60s “U”-profile neck
– Limited Edition design with arctic pearl finish and tortoiseshell pickguard

– Body Material: Alder

– Body Shape: Jazz Bass

– Body Finish: Gloss Nitrocellulose Lacquer

– Neck Material: Maple
– Neck Finish: Gloss Nitrocellulose Lacquer
– Neck Shape: ’60s “U”
– Fingerboard Material: Rosewood
– Fingerboard Radius: 7.25″ (184.1 mm)
– Fingerboard Inlays: White Pearloid Dot
– Number of Frets: 20
– Fret Size: Vintage Tall
– String Nut: Bone
– Nut Width: 1.5″ (38.1 mm)
– Scale Length: 34″ (86.36 cm)

– Hardware Colour: Nickel/Chrome
– Tuning Machines: Pure Vintage Reverse Open-gear
– Bridge: 4-Saddle Vintage Style with Threaded Steel Saddles
– Pickguard: 4-Ply Tortoiseshell
– Control Knobs: Knurled Dome-Style
– Pickup Configuration: SS
– Bridge Pickup: Pure Vintage ‘62 Single-Coil Jazz Bass
– Neck Pickup: Pure Vintage ‘62 Single-Coil Jazz Bass
– Controls: 2x Volume, 2x Tone

– Strings: Fender USA 7250M Nickel Plated Steel (Gauges .045 – .105)

– Genuine ox leather heavy duty strap

KSh22,500.00
Sold By: Madukani
KSh22,500.00 Add to cart
Classic 60s 4 String Jazz Bass with Ox Leather Strap

– Classic ’60s sound from one of the most versatile bass guitars ever created
– Multidimensional tone with two vintage-style single coil pickups
– Play with comfort and dexterity on a ‘60s “U”-profile neck
– Limited Edition design with arctic pearl finish and tortoiseshell pickguard

– Body Material: Alder

– Body Shape: Jazz Bass

– Body Finish: Gloss Nitrocellulose Lacquer

– Neck Material: Maple
– Neck Finish: Gloss Nitrocellulose Lacquer
– Neck Shape: ’60s “U”
– Fingerboard Material: Rosewood
– Fingerboard Radius: 7.25″ (184.1 mm)
– Fingerboard Inlays: White Pearloid Dot
– Number of Frets: 20
– Fret Size: Vintage Tall
– String Nut: Bone
– Nut Width: 1.5″ (38.1 mm)
– Scale Length: 34″ (86.36 cm)

– Hardware Colour: Nickel/Chrome
– Tuning Machines: Pure Vintage Reverse Open-gear
– Bridge: 4-Saddle Vintage Style with Threaded Steel Saddles
– Pickguard: 4-Ply Tortoiseshell
– Control Knobs: Knurled Dome-Style
– Pickup Configuration: SS
– Bridge Pickup: Pure Vintage ‘62 Single-Coil Jazz Bass
– Neck Pickup: Pure Vintage ‘62 Single-Coil Jazz Bass
– Controls: 2x Volume, 2x Tone

– Strings: Fender USA 7250M Nickel Plated Steel (Gauges .045 – .105)

– Genuine ox leather heavy duty strap

KSh22,500.00
Sold By: Madukani
KSh22,500.00 Add to cart
16PCS Premium Essential Masonry Hand Tools Set

– This is a complete bricklayer’s tool kit that is great for the apprentice or experienced mason
– The set contains:
1 x No 5 Conical Plumb Bob with String
1 x 50m 165ft Cloth Tape Measure
1 x 12 Inch Flat Cold Chisel with Rubber Guard
1 x 12 Inch Pin Cold Chisel with Rubber Guards
3 x Brick Laying Masonry Trowels (10 Inch, 8 Inch, 6 Inch)
1 x 12 Inch Stainless Steel Float Plastering Trowel
1 x 8mm Notched Teeth Float Plastering Trowel 280 x 120mm
1 x Line Level
1 x 18 Ply Nylon Twine
1 x 60cm Die Cast Ungraduated Spirit Level
1 x 3lb 1.5kg Mason Hammer with Fibreglass Handle
1 x 4 inch stainless steel scrapper putty knife
1 x Rubber coated gloves pair
1 x 5m steel pocket tape measure

KSh7,100.00
Sold By: Madukani
KSh7,100.00 Add to cart
No 5 Conical Plumb Bob with String

– Conical and fully polished Bob
– It is complete with screwed brass cord fitting
– Made of steel with corrosion resistant plating
– The screw top simplifies attachment of the string to the center of the plumb.
– 300g

KSh550.00
Sold By: Madukani
KSh550.00 Add to cart
50m 165ft Cloth Tape Measure

– Measuring Range: 50 meters/165 feet

– The tape is double-sided metric with a metal pull ring on the front of the tape measure

– All metal internal mechanism and folding handle crank

– Closed reel design to reduce tape wear and for daily hard use

– Clearly printed marks that do not get deleted even with the roughest use

KSh1,100.00
Sold By: Madukani
KSh1,100.00 Add to cart
2PCS 12 Inch Flat and Pin Cold Chisels with Rubber Guards

– 2 x Guarded Cold Chisel 12″ Length
– Sharpened and thickened pointed end made of heat treated chrome-vanadium steel CRV
– Sharp ends made of heat-treated high carbon steel
– Shock-absorbing soft rubber cover handle with ergonomic non-slip grip
– Hammer striking tail made through quenching process for resistance to knocking
– Ideal for everyday masonry works

KSh1,900.00
Sold By: Madukani
KSh1,900.00 Add to cart
3PCS 10 Inch, 8 Inch, 6 Inch Brick Laying Masonry Trowels

– Premium set of bricklayers trowels suited to different applications
– Each Brick Trowel is forged from a single piece of high carbon steel and polished to perfection for a clean finish to any job.
– The blade is taper ground and heat treated for strength and durability.
– Lengths range from 6 inches to 10 inches and widths range from 4-3/4 inches to 5-3/8 inches.
– The treated wooden handle offers a comfortable grip to reduce user fatigue and is set to the correct hang and balance.
– The set includes 10 Inch, 8 Inch, and 6 Inch Bricklayer’s Masonry Trowels

KSh1,700.00
Sold By: Madukani
KSh1,700.00 Add to cart
12 Inch Stainless Steel Float Plastering Trowel

– 280 x 120mm

– Hardened and tempered stainless steel blade

– Flat blade is designed to make a smooth consistent finish every time, no matter the material being finished

– Soft-grip handles for user comfort

– Rigid yet lightweight and durable

– Robotically welded super-strong surface-mounted joint that lasts longer than typical “through-rivet” designs

– Ideal for wall or floor tiles, ceramic or stone

KSh900.00
Sold By: Madukani
KSh900.00 Add to cart
8mm Notched Teeth Float Plastering Trowel 280 x 120mm

– 280 x 120mm

– Hardened and tempered stainless steel blade.

– 8mm square teeth / castle grooves
– Soft-grip handles for user comfort
– 7 Teeth on short edge, 17 on Long
– Ideal for wall or floor tiles, ceramic or stone

KSh1,250.00
Sold By: Madukani
KSh1,250.00 Add to cart